VEHICLE & DRIVER REQUIREMENTS:

VEHICLES AND DRIVER SAFETY GEAR ARE NOT SUPPLIED AND ARE THE RESPONSIBILITY OF THE PARTICIPANT TO ORGANIZE.

• Your vehicle must be in a road worthy condition. No WOF is required, but must be up to WOF standard.
• If roll-caged it MUST be homologated.
• NO VENTED WASTEGATES. Screamer pipes are not permitted for Drift Tutoring Clubsport Basic events due to basic safety requirements for these events.
• Convertible vehicles must have approved roll protection.
• Rear wheel drive vehicles only. No AWD/4WD
• NO fluid leaks of any sort, from anywhere, at any cost
• Battery MUST be secured using 4x M6 8.8 bolts (if not factory position, Motorsport NZ approved mounting is required) Terminal must also be covered or insulated.
• Fire extinguisher is mandatory. Minimum of 0.9kg twin strap mounted within reachable distance of the driver. Must be mounted with 2x M6 8.8 bolts.
• Oil catch can if not factory – Must be of reasonable capacity.
• Seats and belts must be in good condition. If non-factory seats and belts are fitted (race seats and harnesses) these must meet MSNZ Schedule A standards.
• Solid brake pedal
• Door cards / no sharp edges interior and exterior
• All wheel nuts
• Fuel system and battery must be entirely separated from the cabin with a sealed firewall or box (if non factory)
• Front and rear tow hooks
• Drivers must have full 100% cotton overalls or race overalls and approved race helmet. It is not mandatory but gloves and race boots are recommended.

If you turn up with a car that doesn’t meet safety standards you will be asked to repair them before going on-track otherwise you risk missing out all together.

COMPETITION CARS CAN BE USED BUT MUST STILL ADHERE TO SCHEDULE A/DR REQUIREMENTS.

** FOR ALL THE INFORMATION AND REQUIREMENTS AROUND OUR DRIFT EVENTS PLEASE CLICK HERE **